【PC Building】Build an amazing Ryzen 9 water cooling PC.

Abstract

Final result

I bought the BTO PC 4 years ago. However, I wanted to upgrade and customize so I build a new PC. First I decided to build an air cooling PC but AM5 might be strong so I used the money for cooling.
I live in Japan but the German water cooling maker is good and it's expensive in Japan so personally imported it.

All parts

Spec

CPU 16C/32T/3.5GHz(full)/4.7GHz(turbo)
GPU Quadro M2000 + RTX 3080
SSD 1TB Gen3 + 1TB Gen4
HDD 10TB
RAM 64GB/3200MHz
M/B X570 Taichi
FAN Dynamic X2(116.2m³/h) x3 + Noctua 3000(269.3m³/h) x6
Pump EK-Quantam Kinetic(1000L/h/5.2m)
Radiator NexXxoS UT60 420mm

Parts

Main parts

Memory-Trident Z Neo 32GBx2

Trident Z is good for Ryzen and it has beautiful LED

GPU-Palit RTX 3080

Palit GPU is cheeper than ZOTAC but sync might not works.

PSU-RM850

Ryzen 3950

Ryzen 5000 released but it's too expensive, and AM5 will be strong so I chose 3950.

PG4NVZ 1TB

It's cheaper than Samsung and faster.

BarraCuda 8TB

X570 Taichi

It has wifi, bluetooth and more port.

Carryover parts

Seagate 2TB HDD

Quadro M2000

970 EVO

Water cooling parts

Noctua A14 IndustrialPPC 3000

It's one of the most powerful fans in the world.

Fitting

I chose fittings that both ends join tubes by mistake. It was an awful mistake I made.

Flowmeter

Sadly I couldn't use it because I don't have enough fitting because of that mistake.

Fan hub

NexXxoS UT60 420

It's so powerful radiator.

Eisblock XPX Aurora Plexi RGB

So beautiful water block.

EK-Quantum Kinetic 160 DCC D-RGB

Powerful pump incruded in it and beautiful.

Making

Main

Mounting the CPU was very easy and no force needed.

Mounting the RAM need force.


Unmounting the heatsink is a little difficult. Then I will mount SSD.

Mount GPU, cooling parts (make sure CPU grease), and place M/B to the PC case. Then let's test it. I use WS 2818 for lightning if you interested in this please watch this and source code.
www.youtube.com

Water-cooling

Water-cooling is very powerful if you build it wisely.


A big radiator like this will overwhelm air cooling. I tried to make a fan sandwich but maybe it's enough to place one side. Then connect tubes and test it 24 hours. In my case, the pump needs to be connected to PSU, M/B, and M/B should be turned on.

I found the tube bent so I fixed it with tegus. Have a good water cooling day :)